Percussion methodThe striking force is generally applied to the inner ring of the bearing. The striking force of the shield machine room should not be applied to the rolling element and cage of the...
(1) Standard type, clearance adjusted linear bearing, open linear bearing, extended linear bearing, general linear bearing(2) Flange type linear bearings can be divided into: round flange type, fla...
Installation and disassembly of rod end spherical plain bearing
2022-03-25
Where a press is missing or cannot be used, an assembly sleeve and a small hammer can be used to install the end bar spherical plain bearing. The hammering force shall be evenly transmitted to ...
Regular maintenance: In order to ensure the normal operation of the main engine, according to the request of the main engine and the design theory and application experience of the bearing, a maintena
Because there are many balls in the rolling motion between the screw shaft and the screw nut of the ball screw pair, higher motion efficiency can be obtained.